What Are Your Options for Roofing a Home Extension?
|
Approach |
How it looks |
Junction with existing roof |
Best suited to |
|
New metal roof on an existing metal roof |
Colour and profile can be matched for a seamless result |
Metal-to-metal join with straightforward flashing |
Homes whose current metal roof is in sound condition |
|
New metal roof joined to an existing tile roof |
A deliberate contrast, or a colour chosen to sit well beside the tiles |
Custom flashing between two different materials |
Tile roofs in good condition that don’t need replacing yet |
|
Re-roof the whole house in metal |
One consistent roof across the house and the extension |
No old-to-new join at all |
Ageing roofs, or owners already considering a tile-to-metal conversion |
Key Takeaway: The join between the old roof and the new one is where extension roofing succeeds or fails. The first and third options reduce that risk, and the second works well when the flashing is planned carefully.
Which Metal Roof Profile Suits an Extension?
The profile you choose sets the look of the extension and the roof shapes it can handle, so it is worth deciding early. Three profiles cover most home extensions:
- Corrugated: The classic wavy sheet, a natural fit for older homes and traditional streetscapes.
• Trimdek®: A flat pan with raised ribs, widely used on contemporary homes and a popular all-rounder for extensions.
• Klip-Lok®: A concealed-fix profile with clean, uninterrupted lines, often chosen for modern designs and low-pitch or skillion roofs.
Each profile has its own minimum roof pitch, so the profile and the roof form should be chosen together. Our guide to Colorbond roof pitch requirements explains how pitch and profile work together.
Key Takeaway: Settle the profile before the frame is built. It decides the pitch your extension needs, and changing it after the frame is up can mean costly rework.
When Should the Roofer Get Involved in an Extension?
- Design stage: Confirm the profile, pitch and colour so the plans describe a roof that can actually be built.
• Frame stage: Check the frame is set out for the chosen profile, then measure on site, because sheets are generally cut to length and ordered from those measurements.
• Roof-on stage: Sarking, insulation, sheeting and flashings go on, with the aim of getting the extension weathertight so internal trades can start.
• Finishing stage: Gutters, downpipes, ridge capping and final finishing complete the job.
What Mistakes Should You Avoid When Roofing an Extension?
- Leaving the junction as an afterthought: talk to your roofer before the existing roof is cut into, so the join is designed rather than improvised.
• Ignoring the condition of the existing roof: attaching a brand-new roof to an old one that needs replacing soon can mean paying for scaffolding and access twice over.
• Ordering sheets from the plans alone: plans and finished frames rarely match exactly, so wrong sheet lengths are a common and avoidable delay.
• Overlooking site access: long sheets need clear delivery and handling space, and tight side access can change how and when materials arrive.
Key Takeaway: Most extension roofing problems are planning problems, not material problems. Early decisions about the profile, the junction and the existing roof prevent most of them.
How Do You Compare Quotes for an Extension Roof?
Two quotes can look similar and cover very different work. When comparing them, check that each one clearly states:
- Flashing at the junction with your existing roof or walls
• Sarking and insulation, including what type
• Guttering and downpipes for the new roof area
• Scaffolding and safety measures
• Removal and disposal of offcuts and any old roofing
• The expected timeframe and the warranty documentation you will receive